So if you are serious about your equipment, and want to maintain peak performance, it might make sense to consider swapping out your wedges every 12-36 months depending on how often you play, practice, and the durability of the material.
How long do wedge grooves last?
You should inspect your wedges for groove wear every 60-70 rounds. Start by inspecting the overall physical condition of the wedge and groove. A visit to your local Titleist Certified Fitter to evaluate launch, spin, and roll out will ensure you are playing with the best performing wedges.
How often should I sharpen my wedges?
A decent rule of thumb though would be to re-groove every 15 – 20 rounds of golf.
What 3 wedges should I carry?
So generally think about putting in a gap wedge that’s 48 or 50 degrees, a sand wedge that’s between 54 and 56 degrees, and a lob wedge that’s between 58 and 60 degrees. These are general guidelines, make sure you’re working with your fitter to get the gapping that works best for you. 3.
Can you Regroove wedges?
Getting the wedge regrooved is an option, but it’s an inexact process that’s probably not worth the time. “A lot of things can happen when you regroove an old wedge,” said Kyle Cronkright, the director of club fitting at the Jim McClean Golf School’s Texas Golf Center (Ft.
How long do raw wedges last?
Ger21: “Raw steel is softer than chrome plating, so raw wedges will scratch and scuff more than chrome, and potentially wear faster. But if you keep them clean, you should easily get 10 years or more out of them at 12 rounds/year. If you don’t want them to rust, clean and oil them after each round.”
Which wedges spin the most?
- Bettinardi HLX 3.0: 9,422rpm.
- Sub 70 Forged JB: 9,414rpm.
- Ping Glide 4.0: 9,349rpm.
- PXG 0311 Milled: 9,331rpm.
- Cobra King MIM: 9,304rpm.
- Cleveland RTX ZipCore: 9,289rpm.
- Ping Glide Forged: 9,242rpm.
- Cleveland CBX ZipCore: 9,081rpm.
How long should my wedges be?
Here are the lengths I like on wedges. The pitching wedge should be ½” shorter than the # 9 iron in your set. The Gap wedge should be 1” shorter than your # 9 Iron. The Sand wedge can be the same length as the gap wedge or you can go 1 ½” shorter than the # 9 iron.
How often should I replace my golf clubs?
You may notice shots flying higher but not carrying as far, or you might get a low shot that struggles to hold its line. Unless you are playing extremely irregularly, you should be replacing your irons every five years to make sure you are getting the most out of them.
Is groove sharpening legal?
Are golf groove sharpeners legal? While it is perfectly legal to use a golf groove sharpener, your modified club must still comply with the rules of the game regarding golf groove alignment, depth and spacing.
Should I sharpen my wedge grooves?
Only sharpen the grooves when it is absolutely necessary and the face of the club is not creating sufficient friction. Go slow and steady, making sure you maintain the structural integrity of the original grooves. Use a good quality sharpener that fits the grooves of your wedge correctly.
Do I have V or U grooves?
Do new wedges make a difference?
For that reason, I would suggest changing your wedges when you begin to see the initial effects of wear so you can keep your “grip” on the greens. The first signs include wedge shots that launch higher than normal — particularly from the rough — and don’t stop or spin back as much as they once did.
How do you keep wedges clean?
What wedges does Phil Mickelson use?
Mickelson, one of the best short game players of all time, carries three Callaway wedges at the moment. He uses three PM Grind ’19 “Raw” wedges. The PM stands for Phil Mickelson because he helped design the wedges with Roger Cleveland.
What is a 52-degree wedge called?
A 52-degree wedge is considered a gap wedge and is used to fill the gap between your pitching wedge and your sand wedge. Golfers who have a 52-degree wedge in their bag typically have a pitching wedge that’s between 47-48 degrees.
Is a 60 degree wedge necessary?
For the average golfer, having both a 56-degree sand wedge and a 60-degree lob wedge is completely unnecessary. A 56 or 58-degree wedge should be a lot more versatile for most and is the highest wedge loft that should be in most bags.
How long do iron grooves last?
Now, do grooves get dull? Yes, especially on wedges, where you’re hitting out of the sand. So those should be replaced conservatively every three years, more often the more you play.
Can golf irons be Regrooved?
Kelly’s Custom Golf offers precision milling of USGA conforming square and “V” grooves for your irons. Re-grooving will improve control and direction in your shots, lowering your scores!
How do you’re groove a wedge?
Why do pros play raw wedges?
TaylorMade says, and it has been a commonly held theory for a while, that raw wedges that go rusty will spin more and feel softer over time. They should also reduce sun glare and preserve the geometry of the grooves for longer-lasting spin.
Do black Vokey wedges rust?
*Jet Black wedges are raw and will show rust over time.
Why do pros rust their wedges?
Rusty wedges appear in many a tour pro’s bag. Sometimes, the rust is a result of a hard life spent splashing shots out of bunkers and pounding golf balls from the turf on ranges around the globe.
What wedge is closest to Green?
For the average golfer, chipping with a pitching or gap wedge will produce the most consistent shots around the green. Using a gap wedge will be the best place to start for standard chips, but a pitching wedge could work better if the ball is sitting up in the rough.
What wedges does Justin Thomas use?
Interestingly, Thomas brings two lob wedges to tournaments. Typically, he plays with a 60-degree K grind wedge with 6 degrees of bounce, but starting at the 2018 Presidents Cup in Australia, he began using a 60-degree T grind wedge on firm golf courses.