The 36 E-Bike Factory fork is available as a 29″ fork with 160mm of travel (though of course 650b Plus tyres fit into this model) with a FIT GRIP2 or FIT4 damper, Boost spacing and tapered steerer and your pick of 44mm or 51mm offset. It also comes in 650b with 140mm, 160mm or 180mm travel options.
How much travel do Fox 38s have?
The Fox 38 is the biggest single-crown fork Fox has ever made, with its 38 mm stanchions slotting it in between the Fox 36 and their dual-crown 40. With a minimum of 160 mm travel (and a max of 180 mm), it’s mostly going to be found on longer-travel Enduro sleds.
What is better Fox 38 or Fox 36?
By their measurements, Fox says that the 38 fork is “31% stiffer transverse shear, 17% stiffer fore/aft, and 38% torsionally stiffer than the 36.” All that material does make the fork a fair bit heavier, tipping the scale roughly 300g deeper than the 36 that we tested last season.
How much travel does the Fox 34 have?
The new 34 comes in 130mm or 140mm travel and with either the GRIP2 damper or Fox’s familiar (and simpler) FIT4, which is 75 grams lighter, fits a remote, and has one rebound knob and a three-position (open/medium/firm) lever.
What’s the difference between FOX 34 and 36?
Can you lower a FOX 36?
The 2015-2017 36 FLOAT uses an air spring system that can be adjusted down to lower travel settings in 10mm increments. To shorten travel you will need one Neg Plate Spacer (PN: 234-04-627) for each 10mm reduction in travel desired. 2015-2017 36 FLOAT 170mm and 180mm forks can be reduced in travel down to 130mm.
Does FOX Float 36 have lockout?
No, you don’t get a lockout lever like the FIT4 damper, but the way the GRIP2 damper is designed makes it feel, in our opinion, much better than the FIT4 damper when you’re riding terrain that warrants riding a Fox 36 over a Fox 34.
How much does a FOX 36 Weigh?
What is Kashima coating?
Kashima Coat is a proprietary hard anodizing process process invented by the Miyaki Company og Japan. Lubricating molybdenum disulfide is deposited via electrical induction into the billions of micro-pores on the surface of hard-anodized aluminium for better lubrication and less abrasion and wear.
Whats better RockShox or Fox?
Key points when comparing Fox and RockShox
– Both Fox and RockShox offer a range of suspension forks from lightweight XC race forks to long-travel downhill forks. – Results: RockShox dominates World Cup XC, while Fox is tops in World Cup DH racing.
Do I need a RockShox Zeb?
The new RockShox ZEB is a good option for riders who want to go as fast and hard as possible and who have previously thought that they could do with a stiffer fork. On long-travel 29ers, the added stiffness makes sense. Light riders and those who value comfort are better advised to stick with the lighter Lyrik.
Is a Fox fork worth it?
That said, they really are very good forks/dampers. Even the lower models include the proper damping circuits (high and low speed) that will allow the fork to react well to high and low-speed impacts. The basic idea is that fox doesn’t make “cheap” forks, like RS, Marzocchi and others do.
Is Kashima coating worth it?
It definitely has some value, so it’s not completely worthless. In general, I believe it is safe to say that it is not worth it on rear shocks, since they generally have low amounts of friction and negligible durability concerns.
Is Fox 36 Rhythm good?
What is the difference between Fox 36 Factory and performance?
Factory sits at the high end, with the World Cup proven brand engraved, Performance Elite steps down a bit, while the Performance line suits those who do not have tons of money to spend on forks, still keeping themselves in a higher price zone.
What are Fox forks made of?
Thanks everyone. Confirmed with Fox and the lowers are made of magnesium.
What is a Fox 49?
The Fox 49 Float Factory FIT GRIP2 29er Fork 2019 is designed for the latest generation of DH racing bikes, featuring the new FIT GRIP2 damper & boost spacing. The Fox 49 Float Factory FIT GRIP2 29er Fork 2019 is designed for the latest generation of DH racing bikes, featuring the new FIT GRIP2 damper & boost spacing.
Does Fox make 26 inch forks?
Fox 26 Inch Wheel Bicycle Forks.
How do FOX forks reduce travel?
How do you put air in a FOX 36?
Remove the bottom nut and crush washer. Compress the fork as much as possible. The air piston will be visible about one inch below the top of the upper tube. Push the bottom of the air shaft upwards to push the air piston out of the top of the upper tube.
Can you increase travel on FOX 34 rhythm?
Confirmed by Fox directly via phone conversation today, The 2017 29er (or 27.5) Rhythm can have the travel changed by changing air shaft assemblies. The highest the 29er will go is 130mm. They said the 2017 and 2018 Rhythm part numbers are the same.
Where are Fox forks made?
FOX products are designed, tested and manufactured in Santa Cruz County, California by the best people in the industry.
Can you make a Fox 36 140mm?
2018-19 Fox Float 36 Air Shaft Assembly, 140mm
Well you have come to the right place. This is all you need to bring your 27.5 or 29″ Fox Float 36 to 140mm of travel! No need for special tools, or any other parts, this will be the only thing you need to change the travel and get ripping on those trails again.
Is Fox suspension the best?
A Fox lift kit is absolutely worth it if you want to take your truck off-road, but you don’t think your suspension can handle it. When it comes to driving quality and cost-effectiveness, Fox lift kits are very hard to beat. You will not get better value for money from any other brand.
Is the Fox 36 a trail fork?
While it’s always been pitched at the harder-riding end of the spectrum, the 2021 Fox 36 has been refocussed as only a 150mm or 160mm travel trail fork, with the new, burlier 38 taking over longer travel duties.
Is the grip 2 damper worth it?
Definitely more controlled and has better mid-stroke support but a little less plush off the top and a tad harder on the hands. Ultimately, worth it for the better control and less wallowing during drama terrain at speed. I’ve always been happy with the standard grip dampers even after owning several grip 2 forks.
What is rake on a bike fork?
Simply put, fork offset, or fork rake, is the distance between the front axle and the steering axis – the imaginary line running straight through the midpoint of the steerer tube. Fork offset is linked to another important measurement: trail.