The average base head gasket job for a 2.5-liter engine is $1,500 to $1,800 that’s including Parts & Labor. Adding additional items such as Timing Belt & Components, Water Pump, Spark Plugs & Oil Seals, etc runs in the range of $2,200 to $2700. Your Subaru could be a little more or a little less.
Will Subaru pay for head gasket repair?
Subaru will prepay the dealer for the head gaskets, but only if you have very good service history from the dealer.
How long does it take to replace a head gasket on a Subaru?
In most cases, a Subaru head gasket repair takes two to three days depending on parts availability and how quickly the machine shop refinishes the cylinder heads. This gives our Subaru technicians time to repair the vehicle, road test it, and do a final quality assurance inspection.
How much does it cost to fix a head gasket on a Subaru Outback?
How much should I expect this to cost? Depending on the year and engine configuration of your 2.5 Subaru, the base head gasket job for parts (including tax and labor) costs between $1600 and $1700. Adding the timing belt, idlers, and tensioners, seals and water pump adds about $700.
What is the cheapest way to fix a blown head gasket?
Can I drive with blown head gasket?
Blown your head gasket? Keep driving with a blown head gasket and it will inevitably lead to further car trouble. K-Seal can stop the problem in its tracks, before it’s too late. Technically you can drive with a blown head gasket, but we’d always advise against it.
Does Subaru have problems with head gaskets?
So to hear that there is a persistent problem that has plagued Subaru owners for years, some may not believe it. But it’s true. Unfortunately, the automaker gets a bad rap when it comes to its head gaskets. Faulty head gaskets and issues related to these parts have come to be well known among some Subaru owners.
What years did Subaru have head gasket issues?
They have identified four popular Subaru models with the potential to have this engine issue. CR says the 2001-2009 Subaru Forester, 2001-2009 Subaru Outback, 2006-2008 Subaru Impreza, and the 2006 Subaru Baja are more likely to need the head gaskets replaced than other models.
Why do head gaskets fail on Subarus?
Why Do Head Gaskets Fail On Subarus So Often? Any internal combustion engine might experience a head gasket failure, but Subaru’s engines earned their reputation for this particularly troublesome issue. The design is one contributing factor, but the real problem comes down to unreliable material in the gaskets.
How do you tell if a Subaru has a blown head gasket?
- Milky Engine Oil.
- Overheating Engine. …
- Bubbles in the Radiator. …
- White Exhaust Smoke. …
- Blue Exhaust Smoke. …
- Cylinder Misfire. …
- Low Coolant. If the coolant in your vehicle is lower than it should be, a head gasket may be the culprit. …
What are signs of a blown head gasket?
- White smoke coming from the tailpipe.
- BUBBLING IN THE RADIATOR AND COOLANT RESERVOIR.
- unexplained coolant loss with no leaks.
- Milky white coloration in the oil.
- Engine overheating.
How long can you drive a Subaru with a leaking head gasket?
if it’s a SOHC EJ25 you can basically drive them for years with a seeping headgasket. just keep topping them off and they’ll never overheat until they run really low on coolant – which won’t happen if you keep adding it! if it’s a DOHC EJ25 (1996-1998 and 99 Forester/Impreza RS), then you’re hosed.
How many labor hours does it take to replace a head gasket?
For starters, most head gasket jobs require 3-8 hours depending on the how your car is built and what the disassembly and reassembly procedure is. This labor cost is where most of the expense come from for your head gasket job. On top of the labor costs, you have to add on the replacement parts required for the job.
How long does it take to replace a head gasket?
Replacing the gasket can take anything from six hours to a few days, depending on the severity of the failure. A blown head gasket is one of the biggest failures your car can suffer, and to fix it properly takes time.
How much would a blown head gasket cost?
How much does it cost to replace a blown head gasket? The cost of head gasket repairs can run into the thousands, meaning it’s often easier and cheaper to scrap the vehicle than it is to have it repaired. The average cost of head gasket repair is around $1,000 to $2,000, but this isn’t because the parts are expensive.
Can I fix a head gasket myself?
Most blown head gaskets can be properly fixed without a mechanic. There is a point where the damage is too great and you will need the expertise of a professional to replace the gasket, but many leaks in a head gasket can be taken care of with one of our products.
Will Stop leak fix a blown head gasket?
This permanent head gasket sealer stops leaks using an antifreeze-compatible sodium silicate sealing liquid and several gasket-sealing elements. The liquid technology is designed to repair damaged, leaking, and blown head gaskets. It also seals cracked cylinder heads and blocks.
Is replacing head gasket hard?
Head gaskets are one of the more difficult repairs on an engine. They require substantial removal of parts, careful cleaning and preparation of surfaces, and methodical replacement and reassembly of the engine components.
How do you temporarily fix a head gasket?
Does blown head gasket mean new engine?
If the gasket is blew open on your head, your engine damage is already in place. Most likely, the head gasket itself has been damaged, and cooling systems can get into the oil if they have done so already.
What causes a head gasket to fail?
Head gasket failures are usually caused by repeated overheating, or continuing to drive after the car has overheated, so the best way to prevent a head gasket failure is to ensure your cooling system is in good condition.
How do I stop my Subaru head gasket from failing?
- Regularly changing the engine oil.
- Regularly changing the coolant.
- Checking the oil and coolant levels often.
- Use OEM parts, oils, and coolant.
How long do Subaru 2.5 engines last?
Generally speaking, a Subaru 2.5 engine has the ability to run between 250,000 and 300,000 miles before needing any kind of significant auto maintenance or repair. Since most drivers average around 14,000 miles per year, this would mean that a Subaru 2.5 engine could conceivably run for over two decades.
Why are Subarus so unreliable?
One of the core reasons that Subaru reliability has dropped is due to the problems that the Outback and Legacy have had with in-car technology. This is a common reason for declining dependability in a number of makes and models since the early 2000s. Many cars today have a great deal of new and complex technology.
Which Subaru engines to avoid?
- Subaru 2.5-L Turbo 4 Cylinder: …
- SUBARU EJ25: …
- Oil Leakage from the Engine: …
- Oil and Coolant in the Chamber: …
- Excessive Oil Use: …
- Boxer Engine of Subaru: …
- The Drawback of the Subaru Boxer Engine:
Are Subaru 2.5 engines reliable?
A modern Subaru 2.5L engine should have no problem lasting over 200,000 miles as long as you take care of it. There are plenty of 2.5L engines that have lasted over 300,000 miles as well when owners have done the regular maintenance on them such as oil changes, spark plug changes, and coolant changes.
How much does it cost to replace a Subaru engine?
You can expect to spend anywhere from $3500 to $4000 if you need to replace the engine. To get this job done, you have to be skilled in the industry, so, if you go to a shop to do the work you have to budget anywhere between $5000 and $7500.